When a Cargo Placement and Securing Scheme Is Required

A cargo placement and securing scheme defines the position of cargo units in the wagon, how they rest on the floor and the means used to secure them. It must make it possible to load in line with the adopted technical solution and to verify that the actual placement matches it. Whether a separate placement method needs to be developed is determined before the wagon is supplied, by comparing the characteristics of the cargo, its packaging and the rolling stock with the applicable technical conditions.

Applicability of an Existing Solution

Items that look similar may differ in weight, centre of gravity position, support surface and permissible force application points. A change in packaging, unit orientation or wagon model may also affect whether previously prepared documentation still applies. Having a suitable drawing is not enough: the full set of conditions for its use must be checked.

If the intended placement method is not covered by the applicable technical conditions, separate development is required, with the type of documentation and the procedure for its review defined. A loading sketch, NTU (non-standard technical conditions) and MTU (local technical conditions) are not interchangeable names for the same document. The choice depends on the placement method, the transport conditions and the scope of application of the solution.

Dimensions, Weight, Centre of Gravity and Support Points

For each type of cargo unit, the quantity, gross weight and overall dimensions in transport position are required. For equipment, drawings showing dimensions, views and the location of the centre of gravity are needed. The location and dimensions of supports, permissible loads, securing points and manufacturer’s restrictions are specified separately.

Information is also needed on protruding elements, moving parts and transport packaging. Photographs help assess the design but do not replace these data. If the position of the centre of gravity is unknown, it must not be arbitrarily assumed to be at the geometric centre. The procedure for obtaining or substantiating the initial characteristics is determined before calculations are carried out.

Wagon Selection and Placement Verification

Developing the solution requires the characteristics of the wagon type and model: the dimensions of the body or platform, load capacity, floor design and securing elements. Verification covers not only the total weight but also the load distribution and the support conditions of individual units.

For open rolling stock, the clearance gauge check is carried out taking into account the actual position of the cargo on the wagon and its installation height. Free platform area alone does not confirm that heavy equipment can be installed. Replacing the wagon, changing the supports or rotating the item after the solution has been developed requires checking whether the adopted solution still applies.

Securing and Feasibility of the Loading Procedure

The adopted documentation must unambiguously define the position and orientation of cargo units, support elements, securing means and requirements for their installation. Before work begins, it is necessary to establish how the cargo will be lifted, moved and set in place, which materials are available and how the securing will be removed during unloading.

Securing means are selected according to the technical solution. Replacing a material, changing the number of elements or moving securing points requires verification. Actual loading must conform to the adopted documentation. Preparing the solution and reviewing it are separate stages; a review deadline cannot be set without first defining the task and the approving parties.

What to Submit for Technical Development

For the development of placement and securing, submit drawings, the weight and dimensions of each type of cargo unit, the coordinates of the centre of gravity, and the characteristics of supports, packaging and securing points. Specify the intended wagon, the route, and the loading and unloading conditions. If organisation of loading and dispatch is also required, state this separately and indicate what equipment is available on site.

If some initial data are not yet determined, they should be clarified first: an assumption must not quietly become a confirmed characteristic of the cargo. For a development request, send the materials to info@railpromcargo.ru.

For loading wheeled and tracked machinery, equipment and oversized cargo, see the scope of work and initial data for calculation.

This site uses cookies for site functionality and traffic analysis. Privacy policy